Well you have a tv aerial satellite connection and you are thinking of connecting and listening to the radio with a tv aerial. In this article you will get the complete guide, we will share all possible ways to connect your tv aerial with radio programmes. Before we go in depth first get the basic knowledge of the FM, DAB and TV aerials and frequencies. This knowledge will definitely help you in depth. For this the tv aerial connection is compulsory, for this you may concern with tvaerialinstaller.co.uk for the reliable services.
TV Aerial, DAB and FM Frequencies
Usually the tv broadcaster uses the FM, DAB and Tv aerials. They are all different modes of the generating frequencies. The FM and DAB Radio use the VHF (Very High Frequency) for the broadcasting whereas the TV aerials use the UHF (Ultra High Frequency) for the broadcasting. This is clear that tv aerials that you will use for the connection of the tv and radio will also higher the frequency. It will also short the wavelength and the size of the element that is required by the antennas or satellites. Hence the meaning of this theory is there are lots of radio aerials required for this purpose. You can visit https://tv-aerials-uk.co.uk/ for the deep information.
The meaning of the upper theory does not mean that the tv aerial installation does not pick the unwanted frequencies. Let’s take it simple you have installed the conductive material on the roof top obviously there are lots of frequencies travelling in the air. The conductive material will also catch the frequencies those are useless for you. It means the conductor material can also catch the TV aerials, and some other frequencies. If you set the conductive material little bit lower than you can get the TV aerial frequencies for sure.